Power Boat Centre Logo
Home  >  Torsion Axles For Boat Trailer
Disclosure
This website is a participant in the Amazon Services LLC Associates Program. We are reader-supported. If you buy something through links on our site, we may earn an affiliate commission at no additional cost to you. This doesn't affect which products are included in our content. It helps us pay to keep this site free to use while providing you with expertly-researched unbiased recommendations.

The Best Torsion Axles For Boat Trailer

Handpicked
Quality-Checked
Generated From 25K+ Reviews!

Buyer's Guide

Torsion Axles For Boat Trailer Safety Tips

There are several kinds of axles that can be used for a boat trailer. It can be either a flatbed trailer, or the cable system used by most motorized RVs. They both use the same mechanism, which is to have the axle connecting the two lower ends of the trailer to the middle section. This creates a "T" shape. Most of these are made from aluminum.

These are very easy to install and they come in different sizes and styles. They are a good choice if you plan to travel a lot on your boat or if you have bigger vehicles such as big pickups. Just make sure that you measure the trailer correctly before buying one. The distance should be at least three feet between the trailer's middle section and the one that lies behind it. You can also buy extended models for more convenience.

The installation of it is not complicated. The parts are very accessible and they come with complete installation instructions. Of course, you will do some minor modifications to the vehicle to make it suitable for the trailer. Some of these modifications include lengthening the body or cutting out the interior part of the bed. If the vehicle has already undergone modification, the new trailer should fit perfectly.

However, there is one important consideration: safety. Never operate the torsion spring without a safety cover. Make sure that the strap has been installed properly and tightly so that there will be no risk of it coming off. You can always work around this problem by installing a second one.

This device usually only needs to be mounted on one side of the trailer. It doesn't need any other installations. If you're replacing the whole unit, you just need to attach the strap to another piece of hardware.

The weight capacity of the unit varies. There are manufacturers who provide information on it. You need to know what this number is according to your own vehicle. To calculate this, you can subtract the weight of the vehicle from the weight capacity. Of course, you also need to consider the type of travel you'll be doing. If you're just transporting a single person, you don't need one that's able to carry more weight.

Torsion springs are very easy to install. You can start with the mounting hardware. After that, you just need to attach one side of the torsion cable to the pulley. Make sure that you have the other side fastened to the pin.

As for the actual use of this device, you can simply pull the torsion cable as far as it goes. Then, you just have to release the other end and the trailer will pull to the direction you want. There are several manufacturers out there, but the one you should aim for is the one who produces quality components.

Another thing to remember is that this system uses a large amount of power. Therefore, you need to ensure that it's powered by a steady power source. For this, you can either plug an electric cord or use a cigarette lighter. A small one might work well for your needs, but you might want to go for a larger one if you want to pull heavier items.

Remember too that these cables are extremely dangerous if they get tangled up. You might find yourself falling into the water and being crushed under the huge weight of the torsion. This may cause serious injuries, even fatal ones. If you don't want to end up like this, make sure that you always tie your cable properly. There are lots of things to check when you do so.

To help you out more, you can consult some manuals that can help you figure out how to do so. There are some that have illustrations as well as step-by-step instructions. In order to be certain that you will be able to handle this task, you can try borrowing some from your friends, family or even buy one online. It's definitely a great idea to invest in torsion cable to help make your boat trailer pull with more ease. Just be sure to pay attention to the following safety tips.

Keep your eyes open when you are working with the torsion parts. This is because the cable might get so hot that you will have difficulty handling it if you're not careful. As long as you can avoid it, you can definitely increase the performance of your trailer. The first time you use your boat trailer after buying it, you should make sure to properly install all the parts. This is the only way to prevent any possible damage.

menu