Power Boat Centre Logo
Home  >  Remove Barnacles
Disclosure
This website is a participant in the Amazon Services LLC Associates Program. We are reader-supported. If you buy something through links on our site, we may earn an affiliate commission at no additional cost to you. This doesn't affect which products are included in our content. It helps us pay to keep this site free to use while providing you with expertly-researched unbiased recommendations.

The Best Remove Barnacles

Handpicked
Quality-Checked
Generated From 25K+ Reviews!

Buyer's Guide

How to Remove Barnacles From a Stainless Steel Mesh Glove

Remove Barnacles or "sea anemones" as they are sometimes known is a very important aspect of Boat Care. Barnacles on a boat can make the interior of your boat look dirty and unclean. The appearance of barnacles affects the value of your boat, and can make it difficult to trade-in or sell. If you remove barnacles from your boat the appearance and value will improve dramatically. There are many different methods for removing barnacles from boats; however, they are not usually successful every time.

One of the common methods that people use is the simple pressure washer. Most importantly, you must have access to a high-pressure washer with a long hose. To remove barnacles, you should apply the pressure washer to the hull surface using a long-toothed hose. After you have sprayed the hull and it seems to take off, you should allow the water to dry and you should then rinse the boat using water and a soft cloth. It is very important to rinse off the dirt and debris that was sprayed by the pressure washer.

If you do not have access to a high-pressure washer you may also use the scrapber, razor blade, or an old toothbrush to remove barnacles from your boat. First, scrape off the algae that is on the surface of the boat. Second, use the scraper on the hull and the toothbrush on the areas that are covered in hard-plastic. Scraping off layers is important to ensure that you don't damage the paint. Once you have removed all the layers you will be left with a clean smooth surface to paint over.

You can also download article and video guides that are helpful when you want to know how to remove barnacles from your boat. To get started, you should have at least one gallon of marine grade silicone sealant and a rubber mallet to scrape off the tough stuff. The thickness of the film that forms over the whole surface of the boat will determine how difficult it will be to remove. Downloading and using these guides will save you time and money, but you cannot guarantee their effectiveness. Most of the guides available come free of cost, so there is nothing stopping you from trying them out.

One of the most popular ways to remove barnacles is to use marine grade marine glue called "bond" to attach the husks to the bottom of the boat. The advantage of using bond is that it is a lot more secure than the old fashioned homemade "sink and trap" method. The bond is applied using an applicator stick that is made specifically for the task. Once the glue has been spread thoroughly across the underside of the husk, apply pressure with the stick to gently push the glue into the indentation at the bottom of the husk. Be careful not to press too hard. Use the scraper to remove any stray glue.

If using an old inflatable boat with an inflatable bow, then you need to first deflate the boat so that you may work around the hanging barnacle. Place some sheets of paper towel or packing peanuts under the bows to soften the blow as you work around the inflatable boat. Remove the trapped husk using your hands or a scraper. In order to remove the marine growth completely, use a rototiller.

Using a mixture of water and white vinegar, you can effectively power wash the barnacles away. Dampen a sponge with the vinegar and place it on the top of the hanging barnacle. Leave it there for approximately ten minutes. Remove the sponge when the vinegar has completely soaked through the entire area. It would be best to power wash the area with water first, and then with vinegar.

Although you can purchase or rent a power sprayer to clean the surface with a lime detergent, it would be better to just use your stainless steel mesh glove for this job. You can get some great tips on how to remove barnacles from stainless steel mesh gloves by browsing the Internet. You can also purchase special cleaning solutions to clean the surface with a lime detergent. For stubborn stains, you can also take the help of an acid. To clean the remaining residue, simply follow the aforementioned home remedies until the stubborn stains are removed.

menu