Power Boat Centre Logo
Home  >  Mercruiser Parts
Disclosure
This website is a participant in the Amazon Services LLC Associates Program. We are reader-supported. If you buy something through links on our site, we may earn an affiliate commission at no additional cost to you. This doesn't affect which products are included in our content. It helps us pay to keep this site free to use while providing you with expertly-researched unbiased recommendations.

The Best Mercruiser Parts

Handpicked
Quality-Checked
Generated From 25K+ Reviews!

Buyer's Guide

Features of Different Mercruiser Parts

When shopping for Mercruiser parts or spares online you are likely to find that you can input the Mercruiser engine onto the search box. If you have a laptop, this is one of the best ways to find parts. For those without a laptop or who don't use their laptop on a regular basis then the easiest way is to head over to Amazon. Here you can find all the parts that you need to replace, depending on the make and model. In addition to this, it is easy to find spares there, so that those laptops which are not in use can be salvaged.

If you have a Mercruiser Outdrive parts website then you will also find the parts that are specific to the Outdrive range. However, when it comes to Mercruiser parts, if you are unsure about a particular part or unit then it is always advisable to contact the manufacturer or distributor instead of shopping from the website. This is because many parts manufacturers do not sell on the internet. As they will only sell to a dealership, there is no reason that you should not be able to ask any questions or get advice from them. The manufacturer will stock all the parts that are required by law to ensure that the vehicle continues to operate to its full potential, but in the mean time you can purchase the parts online.

When it comes to buying parts for your Mercruiser cars or trucks, you should be careful about which part you buy. For example, if you buy a serial number plate then you could have legal problems if you should try to remove it and sell it as new. For this reason it is always safer to purchase the serial number from the manufacturer before purchasing the part. Most of the time, the parts are also numbered but if you are unsure, it is safe to just refer to the manufacturer for help.

There are numerous other categories of parts that are manufactured by mercruiser parts such as marine and racing parts. For example, there is a marine oil tank cover that is designed to protect the oil from getting dirty. There is also an adjustable air pump that can be used for powering either small air compressors or a larger one. It is designed to fit both onshore and offshore vessels. If you want to use these marine parts in your boats or race car, you need to check with the manufacturer and find out what kind of compatibility the parts will have with your marine engine.

A race car boat owner needs to replace a lot of inboard motor components, especially if they have a high level of performance. The most popular inboard motor parts that race car owners replace are the cylinder head gaskets, the piston seals, the lifters and all of the main bearings. These parts are usually made from different materials, including forged steel, bronze, chrome-plated, brass, nickel-silver, magnesium, bronze, brass, chrome-plated, and many more. There are several advantages to going with a genuine OEM product when replacing the parts. One advantage is that the original manufacturer's sealant or grease is compatible with the replacement parts.

Another category of parts is the shim kit. When it comes to shims, there are two kinds available - OEM and aftermarket. An OEM shim kit will have the exact same quality and specification as the original parts by the company that manufactured them. There are other advantages to using an OEM shim kit, including those that allow water leakages to be prevented during operation and those that help improve the lifespan of the shim kit.

There are a wide variety of other parts as well. Some of the common parts include the outdrive, which is a gear reduction device that is located in the center of the inboard motor assembly. There is also the oil pump, an engine oil control valve similar to that found in a diesel engine. This is used to help maintain the proper levels of oil in the inboard motor.

A special type of outboard motor unit known as the outboard motor assembly (OMA) is attached to the sternum on some vessels. The outboard motor is usually located between the engine nacelle and the main sail. Most ships use the OMA for power rather than oars, but inboard engines are still used in some boats. Since these types of marine engine parts are made to fit specific types of ships, it is important that they are designed to work with the specific outboard unit. The serial number is the number that is used to identify the part. For this reason, it is always necessary to ensure that the parts purchased are made by a reliable manufacturer.

Additional Information

Is MerCruiser and Mercury the same?

Brunswick Corporation's marine engine division, Mercury Marine, is Mercury Marine. Its primary product is the manufacturing and sale of outboard motors. It also manufactures the MerCruiser sterndrives, inboard motors, and MerCruiser series of sterndrives.

Which MerCruiser engine do I have?

You can determine the model of Mercruiser engine by looking at the last letters in the "engine block cod" stamped in all longblocks by General Motors during assembly. The engine code can be used to identify the engine model if the serial number and/or model decals have been lost.

Where are MerCruiser engines made?

All new engines are made at Mercury's headquarters, Fond du Lac.

Is a MerCruiser a Ford engine?

Mercury Marine's inboard marine engine division, Mercruiser, is Mercruiser. So... This engine has a displacement of 3.7 liters. It uses the Ford 460 engine's head, connecting rods and flywheel.

What is the difference between a MerCruiser Alpha and Bravo?

The Bravo One has larger components that are designed to handle greater power. The Alpha One is just not as strong. A Bravo One that isn't rated for maximum power can handle less. This adds to its reliability and longevity, which we all need in a boat.

What is a 470 MerCruiser engine?

In 1976, the MerCruiser 470 was introduced to production. The 3.7-liter, four-cylinder, inline four-cylinder engine produced 170 horsepower and was an alternative to the 160-horsepower, six-cylinder Mercury engines. So... This engine block was also used in many other MerCruiser engines, such as the 170, 190, and 205.

Is MerCruiser 3.0 Chevy or Ford?

The marine 3.0L engine is a Chevy (based upon the old 153) and not the Pontiac Iron Duke (based upon the 151).

How many hours does a MerCruiser last?

Thank you, rasacorinc. As a rule of thumb, a friend suggests that a gas mercruiser's inboard/sterndrive engines should last for at least 1000 hours.

What motor is a MerCruiser 260?

TDI3.0L (150-260hp), Power mhp/kW, Mercury DieselEngines 262/192Dimensions (3L x 32 x 34 "/927 x 813 x 853mm) Type V6 Displacement (L) 3.0 Dimensions (3L x 32 x 34 "/927 x 813 x 853mm)675 lbs/306 kg (engine only), 10 rows

How many hours does an inboard engine last?

Depending on the engine, an inboard engine can last between 1500 and 2000 hours. Maintenance is important to extend the life of an inboard engine, just like with outboard engines.

Which is better inboard or outboard?

Inboard motors last longer than outboard counterparts. An inboard motor can last approximately 1,500 hours before needing maintenance. On the other hand, an outboard lasts about 750 hours. Inboards require less maintenance, which is almost half of the cost of an outboard.

Who makes 3.0 Mercruiser engine?

Mercury Remanufacturing TKS Alpha Comple Engine 3.0LThis engine is among the most popular Mercruiser models. It is also one of its lightest, most reliable, and most fuel-efficient models. Mercury Remanufacturing manufactures this motor, which replaces 3.0L Alpha Sterndrive engines as well as Volvo Penta and OMC.

What year is my Mercury engine?

Your Mercury outboard's serial numbers are indicated by the sequence of numbers or letters at the top of your instruction plate or identification tag. The plate or tag will show below the serial number the year of manufacture for Mercury outboards.

Is Volvo Penta a GM engine?

Huibers stated that Volvo Penta will soon introduce the first of a new fleet of sterndrives using the fifth generation GM motors. At the Nov.

Can you convert a car engine into a boat engine?

With a few modifications, Chevrolet engines can be made to work in marine applications. For boat propulsion, gasoline engines are strong and reliable. Auto parts are easily available from dealers and may be cheaper than marine-specific parts purchased from a marine supply company.

How much HP can a Bravo 2 handle?

2nd place:The Bravo 2 Sterndrive is for twin-engine applications. It can propel a boat to 55 mph with gas engines up to 450 HP. The Bravo 2 can accommodate a propeller of up to 20 inches in diameter. This allows for faster boat to plane transitions and better fuel economy.

How much HP can a bravo one handle?

It is well-mannered and refined, with best-in-class shifting. It is suitable for single, double, and triple applications on boats going over 100 mph and with 600hp or more diesel engines.

How much power can an alpha one handle?

300 horsepowerThe Alpha drives can be rated up to 300HP. Maximum torque is not known, but it is likely to be less than 300 ft/lb. People have had success with Alpha drives with greater HP and torque by taking slow throttle turns and avoiding quick holeshots. We do not warranty applications exceeding 300HP.

Are all Alpha One lower units the same?

All Alpha I's Lower unit (not the Pre Alpha with a lift ring/or pre-load nipple at the top of the shaft), can be interchangeable. The Upper Unit will have a different gear ratio.

Are MerCruiser outdrives interchangeable?

SEI's outdrives are compatible with MerCruiser (r), and can be interchanged.

How many horsepower is a 5.7 Mercruiser?

Three configurations are available for the Mercruiser 5.7-liter marine engine. The standard 5.7 produces 250 horsepower through the prop shaft. The 5.7 EFI, or electronic fuel-injected model, produces 260 horsepower. The 350 Magnum MPI, or Multi Port Fuel Injection engine, is rated at 300 horsepower.

How many horsepower is a 7.4 MerCruiser?

Mercruiser B-Block 7.4L V8 Marine Engine Models Propshaft Horsepower Rating) 3101 (2752) 3851 Proshaft Kilowatts Rating) 2311 (2052), 2871 Displacement 454 Ci (7.4 L)4200-4600 RPM 4600-5000 RPM Maximum rpm @WOT3 4200-4600 RPM 4600-5000 RPM10 more rows

menu