Power Boat Centre Logo
Home  >  Boat Anchor For Lakes
Disclosure
This website is a participant in the Amazon Services LLC Associates Program. We are reader-supported. If you buy something through links on our site, we may earn an affiliate commission at no additional cost to you. This doesn't affect which products are included in our content. It helps us pay to keep this site free to use while providing you with expertly-researched unbiased recommendations.

The Best Boat Anchor For Lakes

Handpicked
Quality-Checked
Generated From 25K+ Reviews!

Buyer's Guide

Types of Boat anchors for Lakes

Boat anchors are used for holding down a boat while it is in the water. Boat anchors provide safety and security to a boat as it is being towed or pumped around by a motorboat or other type of boat. There are many types of anchor systems, some using ball bearings, and some using an internal weight bearing system. The system you select depends upon how your boat will be used.

Ball bearings are the most traditional type of boat anchor. These are often solid iron and have a steel reinforced core which adds additional strength to the metal. A common style of ball bearing boat anchor is the type that mounts on the bow of a boat. Most boaters like this style because it provides greater stability.

Magnetic anchors are used for many boats. These use magnetic motors to provide the holding force. While the effectiveness of these types of anchors vary from boat to boat, magnetic anchored boats are usually the least expensive system available. However, they do not offer the same stability or carrying force as magnetic or ball bearing counterparts.

Trolley boat anchors are the most popular system for holding down a boat. This type of anchor weight is carried by the trolley and can be released at any time. These types of boat anchors are used to get a boat up to the top of a lake or pond. To install a trolley anchor, many boat owners have found it to be a simple process. If you are considering this style of anchor for your boat, you may want to research the trolley anchor to find out what types are available and how it might best work for your particular situation.

Another type of anchor for Lakes is the flat bottom anchor. These flat bottom anchor systems work well for floating piers, but are rarely used for holding down a boat in a lake or other body of water. The flat bottom mooring is similar to a dock anchor, except it is not connected to the dock, and because it is not anchored in the water, will not interfere with the free movement of the lake or pond.

There are also special anchor designs for Lakes. Some of these designs use an "ice-pick" style of shank. Ice pick style shanks are often used to anchor large vessels, such as powerboats. The shanks are placed on the front or back of the boat and are designed in an open triangle shape to allow free movement in the water, while providing ample holding power in case of a sudden ice or weather condition. This style of anchor design can also work well with small vessels that are fastened in standing up flat on their moorings.

Smaller craft such as skiffs or kayaks do well with small jacks or quick links. These types of boat anchors are normally built with a full-round shank to provide the best protection against strong winds and ice conditions. Smaller crafts, such as the flat bottomed skiffs, should be tied up with low tension line to insure that the boat is kept taut at all times. Tension is important to help prevent the anchor from getting "tied up" in the water when strong winds come around. This allows the skiff to move freely in the water even with strong winds blowing across it.

The last main type of boat anchor for lakes comes in the form of the fluke anchor. The fluke anchor has been around for centuries, and is one of the oldest forms of boat mooring. The design of the fluke anchor resembles that of an old-fashioned seagoing rope, except it uses grapnels instead of hooks to attach itself to the bottom of the lake. The result is that the spool of rope that the anchor comes in is longer, and requires a larger number of turns to get the vessel in to the lake. However, since there are not a great many boats available that fit this design, the majority of anglers will probably never use this type of boat anchor on their lake.

menu