Marine Battery Switch For Boat
There are many types of marine battery switch and each has its own peculiarities. The marine battery switch is one of the most vital devices for all water vessels. You would not want your boat to stop in the middle of a trip just because of a dead battery, would you? This is why you must get the best marine battery switch possible. Here's a look at the five main categories of switches and their basic features.
The first and probably the easiest to find battery switches is those that have large icons. These large battery switches often come in blue and/or green. They are also usually made of clear plastic, as clear plastics are easy to clean and they do not retain stains and odors as well as some other plastics do. The large blue and green icons in the top right corner of the switch are what you will be looking for when you are looking for a marine battery switch. The small horizontal band along the left side is usually for adjusting the brightness of the light.
The next type of marine battery switch is the heavy duty abs plastic housing. These marine battery switches can either be made out of heavy duty ABS plastic or polycarbonate. You'll be able to find these switches in different sizes and varying colors.
The third type of switch is the heavy duty isolator switch for boat. This switch has terminals for all of the main battery drains including battery cable, boat battery, alternator and so forth. Sometimes these isolator switches also have terminals for the 12-volt secondary battery drains. Sometimes the isolator has two separate wires that are connected to the unit by means of a female connector. If this is the case then the terminals are usually located near the side of the battery box for convenience.
A marine battery switch is easy to install if you have the right type of connection and terminal studs. If you are not familiar with these studs then it would probably be a good idea to get some help from an expert so that you don't hook up the wrong thing. It's also important to check price first before you buy a marine switch because they vary greatly in price. You should check for the brand name, the unit manufacturer and the model number.
The fourth type of switch is the heavy duty ABS plastic housing. These marine battery switches usually have terminals for all of the main battery drains such as battery cable, boat battery, alternator and so on. Sometimes these switches also have terminals for the 12-volt secondary battery drains. Sometimes the ABS plastic housing has two separate wires that are connected to the unit by a female connector. If this is the case then the terminals are usually located in the rear of the unit.
The last type of switch is the wire harness system. This type of marine battery switch connects all of your batteries together so that they can't be reversed during a discharge or an recharge. The main advantage of having a wire harness system is that it is very reliable since the wire is protected by thick insulation that is water proof. There is one drawback though and that is that it's difficult to replace the individual batteries that need to be recharged with the wire harnesses.
There are a lot of things that you should consider when looking for a marine battery switch for boat. Make sure that the type of switch that you are buying can handle all of the batteries that you will put in your boat. Check the wattage, the minimum amps and the maximum watts that your batteries can handle. Choose a switch that has a standard mounting holes so that you will be able to mount it right on your boat.